• Overview
  • Specifications
  • Related Products

Overview

Our DYNATORQUE Series SRD  automated-valve nondeclutchable manual overrides are used with pneumatic, hydraulic and back-drivable electric actuators. These products are sandwich mounted as part of an automated valve package to provide manual operation of the automated valve if a loss of plant air supply, power gas, hydraulic fluid power or electricity occurs.

  • Standard ISO 5211 mounting dimensions on top and bottom flanges or custom machined for mounting to actuator and valve
  • Device is transparent to valve operation when disengaged
  • Alternative to SD Series; SRD is for spring return applications only
  • 11 different frame and spur combinations provide output torque from 3000 to 260,000 lb-in (340 to 29,375 N·m)
  • Select frame sizes available with chainwheel option for spring return actuators in overhead locations
  • Non-declutchable override sandwich mounted between valve and actuator

Specifications

Model Spring Return Actuators
Actuator Spring End Torque
lb-in  [N·m]
Override Maximum
Torque Rating
lb-in  [N·m]
Mechanical
Advantage
HW
Size*
Rim
Pull*
DT3SRD  1111  [126] 3000  [339] 8.10  10 74
DT7SRD  2593  [293]
7000  [791]
12.96 14 77
DT12SRD 
4444  [502]
12,000  [1356]
13.68 24 73
DT21SRD 
7778  [879]
21,000  [2373]
22.50 30 62
DT36SRD 
13,333  [1506]
36,000  [4067]
19.00 36  105
DT40SRD 
14,815  [1674]
40,000  [4519]
27.60 36 81
DT50SRD 
18,519  [2092]
50,000  [5649]
60.80 36 46
DT54SRD 
23,330  [2636]
63,000  [7118]
91.20 20 69
DT90SRD 
33,333  [3766]
90,000  [10,169]
49.92 36 100
DT140SRD 
51,852  [5859]
140,000  [15,818]
78.00 36 100
DT200SRD
74,074  [8369]
200,000  [22,597]
150.00 36 74
DT260SRD
96,296  [10,880]
260,000  [29,376]
264.00 30 66


Model  Hsg Bottom
Mounting Pattern
(Minimum BCD/Tap)
Hsg Bottom
Mounting Pattern
(Standard BCD/Tap)
Hsg Bottom
Mounting Pattern
(Maximum BCD/Tap)
Cover
Mounting 
Pattern
(Minimum BCD/Tap)
Cover
Mounting 
Pattern
(Standard BCD/Tap)
Cover
Mounting 
Pattern
(Maximum BCD/Tap)
Total
Weight
(lb)
DT3SRD
1.968/4-20
2.756-(4)5/16-18
4.016-3/8-16
2.756-.344
2.756-(4).344
4.250-.406
19
DT7SRD
3.250-3/8-16
4.016-(4)3/8-16
5.000-1/2-13
3.750-.438
4.016-(4).406
5.000-.562
27
DT12SRD
3.750-3/8-16
4.016-(4)3/8-16
6.496-3/4-10
4.750-.562
4.921-(4).562
6.496-.812
45
DT21SRD
4.500-5/8-11
5.512-(4)5/8-11
7.000-3/4-10
5.500-.562
5.512-(4).688
7.750-.812
62
DT36SRD 
6.000-1/2-13
6.496-(4)3/4-10
10.250-3/4-10
6.000-.563
6.496-(4).812
10.000-.688
126
DT40SRD
6.000-1/2-13
6.496-(4)3/4-10
10.250-3/4-10
6.000-.563
6.496-(4).812
10.000-.688
126
DT50SRD 
6.000-1/2-13
6.496-(4)3/4-10
10.250-3/4-10
6.000-.563
6.496-(4).812
10.000-.688
154
DT54SRD
6.000-1/2-13
6.496-(4)3/4-10
10.250-3/4-10
6.000-.563
6.496-(4).812
10.000-.688
151
DT90SRD
6.500-3/4-10
10.000-(8)5/8-11
11.750-3/4-10
8.500-.688
10.000-(8).688
10.750-.812
258
DT140SRD 
6.500-3/4-10
10.000-(8)5/8-11
11.750-3/4-10
8.500-.688
10.000-(8).688
10.750-.812
261
DT200SRD
10.000-5/-11
14.016-(8)1-1/8-7
15.500-1-8
12.450-.688
14.016-(8)1.188
15.000-1.188
724
DT260SRD
10.000-5/-11
14.016-(8)1-1/8-7
15.500-1-8
12.450-.688
14.016-(8)1.188
15.000-1.188
764

Notes:

* Handwheel and rim efforts shown are calculated at unit maximum torque rating. In the event that different handwheel and rim effort combinations are desired, please use the following formulas or contact Cameron for assistance.

To Find: Handwheel diameter for a given output torque at a given rim effort, divide the output torque by the mechanical advantage and multiply the result by two. Then divide this result by the handwheel rim effort.

To Find: Rim effort for a given output torque with a given handwheel diameter, divide the output torque by the mechanical advantage and multiply the result by 2. Then divide this result by the handwheel diameter. 

1. The DT50SD and DT90SD have a 4:1 spur assist. DT54SD and DT140SD have a 6:1 spur assist.

2. Handwheels listed are recommended sizes to produce full rated torque with rim effort listed.

3. Standard mounting patterns on all units are per ISO 5211 (UNC) specifications.